You're viewing a previously published revision of this guide.  View latest revision

Older
Jun 05, 2020 - 09:06:46
Jun 12, 2020 - 11:06:35 Jun 05, 2020 - 09:06:46 Jun 01, 2020 - 03:06:51 Jun 01, 2020 - 03:06:41 Jun 01, 2020 - 03:06:54 Jun 01, 2020 - 12:06:59 Jun 01, 2020 - 09:06:42 Jun 01, 2020 - 09:06:00 Jun 01, 2020 - 09:06:20 Jun 01, 2020 - 09:06:03 Jun 01, 2020 - 09:06:11 Jun 01, 2020 - 09:06:27 Jun 01, 2020 - 09:06:15 Jun 01, 2020 - 09:06:43 May 30, 2020 - 10:05:08 May 30, 2020 - 10:05:46 May 30, 2020 - 10:05:35 May 30, 2020 - 10:05:50 May 30, 2020 - 10:05:51 May 30, 2020 - 10:05:13 May 30, 2020 - 10:05:24 May 30, 2020 - 10:05:12 May 30, 2020 - 10:05:25
Newer

Voron 0 Assembly Guide: 12. Final Mechanical Assembly

Written By: John Gilbert (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 4

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

  1. Attach the top beams as shown. Note the pre-insertion of M3 nuts.

    • Attach the top beams as shown.

    • Note the pre-insertion of M3 nuts.

  2. Install the belt tensioning printed nuts.

    • Install the belt tensioning printed nuts.

  3. Add nuts as shown.

    • Add nuts as shown.

    • Double check.

  4. Add printed legs and purchased feet, as shown.

    • Add printed legs and purchased feet, as shown.

  5. Attach the skirts. A ball end hex drive may be helpful in tightening the skirt screws.

    • Attach the skirts. A ball end hex drive may be helpful in tightening the skirt screws.

    • The mechanical assembly is now complete. Congratulations!

Author

with 1 other contributor

John Gilbert

Member since: 02/05/2020

1,744 Reputation

17 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 1,234