You're viewing a previously published revision of this guide.  View latest revision

Older
Dec 09, 2019 - 11:12:54
Dec 14, 2019 - 02:12:14 Dec 10, 2019 - 12:12:01 Dec 10, 2019 - 12:12:42 Dec 10, 2019 - 12:12:51 Dec 10, 2019 - 12:12:46 Dec 10, 2019 - 12:12:28 Dec 09, 2019 - 11:12:54 Dec 09, 2019 - 11:12:47 Dec 09, 2019 - 11:12:25 Dec 09, 2019 - 11:12:19 Dec 09, 2019 - 11:12:01 Dec 09, 2019 - 11:12:15 Dec 09, 2019 - 11:12:09 Dec 09, 2019 - 11:12:40
Newer

Pre-Assembly Checklist

Written By: insurgus
  • Comments: 0
  • Favorites: 0

Difficulty

Easy

Steps

1

Time Required

01:00:00

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Ensure you have all the printed parts you require for assembly. Check the manual to verify that all parts needed are ready.

    • Ensure you have all the printed parts you require for assembly. Check the manual to verify that all parts needed are ready.

    • If doing a phased build, make sure you have the parts required for the section you will be working on.

    • Verify that all printed parts meet the basic print quality requirements located in the manual.

Author

insurgus

Member since: 12/09/2019

87,639 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 7

All Time: 747