Difficulty
Moderate
Steps
9
Time Required
02:00:00 - 03:00:00
Sections
1
Flags
This guide is not managed by the site's staff.
Allen Key Set
Insert wisdom here.
Distance shown is from the front of the printer.
Use calipers to measure placement.
New line.
Use calipers to measure 8mm rod placement.
Continue to the Tool Offset Switch
Cancel: I did not complete this guide.
Member since: 01/10/2020
85,124 Reputation
15 Guides authored
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 10
All Time: 357