Skip to main content
  1. Printed pin retainer should fit snugly to prevent pin from falling out when machine is flipped.
    • Printed pin retainer should fit snugly to prevent pin from falling out when machine is flipped.

  2. Most FSR pads have a sticky backing. Peel carefully.
    • Most FSR pads have a sticky backing. Peel carefully.

  3. Bed power wires should be oriented towards the rear of the printer.
    • Bed power wires should be oriented towards the rear of the printer.

Finish Line

ArmyAg08

Member since: 01/10/2020

85,124 Reputation

15 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 420