05 - Gantry Assembly

Written By: ArmyAg08
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

00:30:00 - 01:00:00

Sections

1

Flags

1

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

  1. Be sure to lube the bearings before adding the 8mm rods. Be sure to lube the bearings before adding the 8mm rods. Be sure to lube the bearings before adding the 8mm rods.

    • Be sure to lube the bearings before adding the 8mm rods.

    Edit

  2. Be sure to add lube to the bearings before assembly. Be sure to add lube to the bearings before assembly.

    • Be sure to add lube to the bearings before assembly.

    Edit

  3. Ensure smooth movement on both axis before tightening down to the frame. Ensure smooth movement on both axis before tightening down to the frame. Ensure smooth movement on both axis before tightening down to the frame.

    • Ensure smooth movement on both axis before tightening down to the frame.

    Edit
  4. Edit
Finish Line

Author

ArmyAg08

Member since: 01/10/2020

85,124 Reputation

15 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 15

All Time: 484