Help
Gordon Broom
@gjbroom
Gordon Broom
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 07/20/2020 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 07/20/2020 | |
Instead of tape on the ends of the extrusions to hold the additional nuts I found just screwing in an M3x8 SHCS into the endmost nuts, to tighten the nut against the extrusion, and then they don’t move. It’s also easier to see where they are.