It took me more than a year to realize that this was the issue with my 2.4. It was out by 0.1 from left to right. I verified that the beam rocked corner-to-corner on a flat surface. I twisted the beam with some clamps until it no longer rocked corner to corner. Its now within 0.04.
Moving the probe to be at the same Y offset from the X axis would allow this to be comped out with mesh bed leveling. I think this issue is a ringing endorsement for a force based probe.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
It took me more than a year to realize that this was the issue with my 2.4. It was out by 0.1 from left to right. I verified that the beam rocked corner-to-corner on a flat surface. I twisted the beam with some clamps until it no longer rocked corner to corner. Its now within 0.04.
Moving the probe to be at the same Y offset from the X axis would allow this to be comped out with mesh bed leveling. I think this issue is a ringing endorsement for a force based probe.